| Boron trifluoride | |
|---|---|
| Identifiers | |
| CAS number | 7637-07-2 , 13319-75-0 (dihydrate) |
| PubChem | 6356 |
| ChemSpider | 6116 |
| EC number | 231-569-5 |
| UN number | Compressed: 1008. Boron trifluoride dihydrate: 2851. |
| ChEBI | CHEBI:33093 |
| RTECS number | ED2275000 |
| Jmol-3D images | Image 1 |
|
|
|
|
| Properties | |
| Molecular formula | BF3 |
| Molar mass | 67.82 g/mol (anhydrous) 103.837 g/mol (dihydrate) |
| Appearance | colorless gas (anhydrous) colorless liquid (dihydrate) |
| Density | 0.00276 g/cm3 (anhydrous gas) 1.64 g/cm3 (dihydrate) |
| Melting point |
−126.8 °C, 146.4 K |
| Boiling point |
−100.3 °C, 172.9 K |
| Solubility in water | very soluble |
| Solubility | soluble in benzene, toluene, hexane, chloroform and methylene chloride |
| Hazards[1][2] | |
| GHS pictograms | |
| GHS signal word | DANGER |
| GHS hazard statements | H330, H314 [note 1] |
| EU Index | 005-001-00-X |
| EU classification | Very toxic (T+) Corrosive (C) |
| R-phrases | R14, R26, R35 |
| S-phrases | (S1/2), S9, S26, S28, S36/37/39, S45 |
| NFPA 704 |
0
4
1
|
| Flash point | non-flammable |
| Related compounds | |
| Related compounds | Boron trichloride Boron tribromide Boron monofluoride |
| (verify) (what is: /?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
|
| Infobox references | |
Boron trifluoride is the chemical compound with the formula BF3. This pungent colourless toxic gas forms white fumes in moist air. It is a useful Lewis acid and a versatile building block for other boron compounds.
Contents |
The geometry of a molecule of BF3 is trigonal planar. The D3h symmetry conforms with the prediction of VSEPR theory. The molecule has no dipole moment by virtue of its high symmetry. The molecule is isoelectronic with the carbonate anion, CO32−.
BF3 is commonly referred to as "electron deficient," a description that is reinforced by its exothermic reactivity toward Lewis bases.
In the boron trihalides, BX3, the length of the B-F bonds (1.30 Å) is shorter than would be expected for single bonds,[3] and this shortness may indicate stronger B-X π-bonding in the fluoride. A facile explanation invokes the symmetry-allowed overlap of a p orbital on the boron atom with the in-phase combination of the three similarly oriented p orbitals on fluorine atoms.[3]
BF3 is manufactured by the reaction of boron oxides with hydrogen fluoride:
Typically the HF is produced in situ from sulfuric acid and fluorite (CaF2).[4] Approximately 2300-4500 tonnes of boron trifluoride are produced every year.[5]
On a laboratory scale, BF3 is produced by the thermal decomposition of diazonium salts:[6]
Anhydrous boron trifluoride has a normal boiling temperature of −100.3 C and a critical temperature of −12.3 C, so that it can be stored as a refrigerated liquid only between those temperatures. Storage or transport vessels should be designed to withstand internal pressure, since a refrigeration system failure could cause pressures to rise to the critical pressure of 49.85 bar (4.985 MPa).[7]
Boron trifluoride is corrosive. Suitable metals for equipment handling boron trifluoride include stainless steel, monel, and hastelloy. In presence of moisture it corrodes steel, including stainless steel. It reacts with polyamides. Polytetrafluoroethylene, polychlorotrifluoroethylene, polyvinylidene fluoride, and polypropylene show satisfactory resistance. The grease used in the equipment should be fluorocarbon based, as boron trifluoride reacts with the hydrocarbon-based ones.[8]
Unlike the aluminium trihalides, the boron trihalides are all monomeric. They undergo rapid halide exchange reactions:
Because of the facility of this exchange process, the mixed halides cannot be obtained in pure form.
Boron trifluoride is a versatile Lewis acid that forms adducts with such Lewis bases as fluoride and ethers:
Tetrafluoroborate salts are commonly employed as non-coordinating anions. The adduct with diethyl ether, boron trifluoride diethyl etherate or just boron trifluoride etherate (BF3·O(Et)2) is a conveniently handled liquid and consequently is a widely encountered as a laboratory source of BF3. It is stable as a solution in ether, but not stoichiometrically. Another common adduct is the adduct with dimethyl sulfide (BF3·S(Me)2), which can be handled as a neat liquid.
All three lighter boron trihalides, BX3 (X = F, Cl, Br) form stable adducts with common Lewis bases. Their relative Lewis acidities can be evaluated in terms of the relative exothermicities of the adduct-forming reaction. Such measurements have revealed the following sequence for the Lewis acidity:
This trend is commonly attributed to the degree of π-bonding in the planar boron trihalide that would be lost upon pyramidalization of the BX3 molecule.[9] which follows this trend:
The criteria for evaluating the relative strength of π-bonding are not clear, however.[3] One suggestion is that the F atom is small compared to the larger Cl and Br atoms, and the lone pair electron in pz of F is readily and easily donated and overlapped to empty pz orbital of boron. As a result, the pi donation of F is greater than that of Cl or Br.
In an alternative explanation, the low Lewis acidity for BF3 is attributed to the relative weakness of the bond in the adducts F3B-L.[10][11]
Boron trifluoride reacts with water to give boric acid and fluoroboric acid. The reaction commences with the formation of the aquo adduct, H2O-BF3, which then loses HF that gives fluoboric acid with boron trifluoride.[12]
The heavier trihalides do not undergo analogous reactions, possibly the lower stability of the tetrahedral ions BX4- (X = Cl, Br). Because of the high acidity of fluoroboric acid, the fluoroborate ion can be used to isolate particularly electrophilic cations, such as diazonium ions, that are otherwise difficult to isolate as solids.
Boron trifluoride is most importantly used as a reagent in organic chemistry, typically as a Lewis acid. Examples:[5][13]
Other uses:
Boron trifluoride was discovered in 1808 by Joseph Louis Gay-Lussac and Louis Jacques Thénard, who were trying to isolate "fluoric acid" (i.e. hydrofluoric acid) by combining calcium fluoride with vitrified boric acid; the resulting vapours failed to etch glass, so they named it fluoboric gas.[14]
|
|||||